Yamaha DVX-S100 Owner's Manual - Page 25
USING BASIC FUNCTIONS, BASIC PLAYBACK, Basic operations
View all Yamaha DVX-S100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
USING BASIC FUNCTIONS BASIC PLAYBACK Basic operations You can play the software loaded on the audio and video components connected to this unit. SLEEP DSP program buttons B.BOOST POWER TV AV SLEEP POWER TV MODE INPUT CH VOL MUTE SUBTITLE AUDIO REC TUNER MD CD-R VCR VIDEO 2 VIDEO 1 CODE SET SHIFT CD DVD AMP HALL JAZZ ROCK ENTERTAINMENT 1 2 3 4 SETUP ANGLE SPORTS MONO MOVIE MOVIE 1 MARKER MOVIE 2 5 6 7 8 /DTS 9 PLAY MODE SELECT 0 REPEAT MATRIX 6.1 >-10 A-B STEREO CANCEL TOP MENU LEVEL GROUP MENU SET MENU PRESET ABCDE PAGE MUTE CH CH ENTER PRESET TEST ON SCREEN B. BOOST RETURN VOL (U.S.A. model) POWER ( ) Input selector buttons MUTE VOL + / - Indication on the front panel display (example): SP VIDEO 1 VIDEO 1 AUTO Selected input source Input mode 1 Press POWER ( ) to turn on the power. 2 Turn on the A/V component connected to this unit. 3 Press INPUT H/G on the front panel repeatedly (one of the input selector buttons on the remote control) to select the input source. The selected input source name and input mode appear on the front panel display for a few seconds. 4 Start playback or select a broadcast station on the source component. Refer to the operation instructions for the component. 5 Adjust the volume to the desired level. The volume level is displayed digitally. Example: -70 dB Control range: VOLUME MUTE (minimum) to 0 dB (maximum) Note • If you have connected a recording component to the VCR OUT, or MD/CD-R OUT jacks, and you notice distortion or low volume during playback of other components, try turning the recording component on. I Enhancing the bass tones Press B. BOOST. • "Bass Boost ON" appears in the display. • This function enhances the bass tones of the subwoofer by increasing the level of the low-range frequencies. • To cancel B. BOOST mode, press B. BOOST again. y • The B. BOOST mode does not function when the headphones are connected. Note • If a thudding noise is heard from the subwoofer when this function is turned on, lower the subwoofer level. Otherwise, the subwoofer may be damaged due to an excessive input level of low-bass signal. I To mute the sound Press MUTE on the remote control. To resume the audio output, press MUTE again. y • You can also cancel mute by pressing VOL +/-, etc. • During muting, the "MUTE" indicator flashes on the front panel display. English 21