Yamaha PSR-SX600 PSR-SX600 Reference Manual - Page 102
MIDI Transmit Settin, Upper, Lower
![]() |
View all Yamaha PSR-SX600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Chord Sys/Ex. The "Transmit" setting turns MIDI transmission of MIDI chord exclusive data (chord detect. root and type) on or off. The "Receive" setting turns MIDI reception and recognition of MIDI chord exclusive data generated by external equipment on or off. MIDI Transmit Settings The explanations here apply to the Transmit page in step 4 on page 99. This determines which parts will be sent as MIDI data and over which MIDI channel the data will be sent. 12 3 The dots corresponding to each channel (1-16) flash briefly whenever any data is transmitted on the channel(s). NOTE If "WLAN" is shown, this instrument can handle MIDI messages received via the USB wireless LAN adaptor connected to the [USB TO DEVICE] terminal. When "WLAN" is not shown although the USB wireless LAN adaptor is connected, turn the instrument off then on again. 1 Use the [1 ]/[2 ] (Part) buttons to select the part for changing transmit settings. You can use the [1 ] button to skip up or down through the part type (keyboard part, Multi Pad, and Style), while you can use the [2 ] button to move up or down to the next part one by one. The Parts listed on this display are the same as those shown in the Mixer display and Channel On/Off display with the exception of the two parts below. Upper: A keyboard part played on the right side of the keyboard from the Split Point for the Voices (RIGHT 1 and/or 2). Lower: A keyboard part played on the left side of the keyboard from the Split Point for the Voices. This is not affected by the on/off status of the [ACMP] button. 2 Use the [3 ] (Transmit Channel) buttons to select a channel via which the selected 9 part will be transmitted. NOTE If the same transmit channel is assigned to several different parts, the transmitted MIDI messages are merged to a single channel-resulting in unex- pected sounds and possible glitches in the connected MIDI device. NOTE Protected Songs cannot be transmitted even if the proper Song channels 1-16 are set to be transmitted. 3 Use the [4 ]-[8 ] button to enter checkmarks to the corresponding MIDI messages you wish to be transmitted. Connections MIDI messages having checkmarks can be transmitted. • [4 ] (Note): Note events • [5 ] (CC): Control Change • [6 ] (PC): Program Change • [7 ] (PB): Pitch Bend • [8 ] (AT): After Touch 102 PSR-SX600 Reference Manual
![](/manual_guide/products/yamaha-psrsx600-psrsx600-reference-manual-90070f8/102.png)