Yamaha PSR-SX600 PSR-SX600 Reference Manual - Page 62

[1 ]- Rec Start (Punch [3 ] In) Determines the Punch In timing by using the [1 ]/[2 ] buttons. Normal: Overwrite recording starts when the Song playback is started via the SONG CONTROL [F/ K] (PLAY/PAUSE) button or when you play the keyboard in the Synchro Standby mode. First Key On: The Song plays back normally, then starts overwrite recording as soon as you play the keyboard. Punch In At: The Song plays back normally up to the beginning of the indicated Punch In measure, then starts overwrite recording at that point. You can set the Punch In measure by pressing the [3 ] button. [4 ]- Rec End (Punch [6 ] Out) Determines the Punch Out timing by using the [1 ]/[2 ] buttons. Replace All: This deletes all data after the point at which recording is stopped. Punch Out: The Song position at which recording is stopped is regarded as the Punch Out point. This setting maintains all data after the point at which recording is stopped. Punch Out At: Actual overwrite recording continues until the beginning of the specified Punch Out measure (set with the corresponding display button), at which point recording stops and normal playback continues. This setting maintains all data after the point at which recording is stopped. You can set the 3 [7 ] Punch Out measure by pressing the [6 ] buttons. Pedal Punch In/Out When this is set to On, you can use Foot Pedal 2 to control the Punch In and Punch Out points. While a Song is playing back, pressing (and holding) Foot Songs Pedal 2 instantly enables Punch In recording, while releasing the pedal stops recording (Punch Out). You can press and release Foot Pedal 2 as often as you want during playback to punch in/out of overwrite recording. Note that the current function assignment of the Foot Pedal 2 is cancelled when the Pedal Punch In/Out function is set to On. NOTE Pedal Punch In/Out operation may be reversed depending on the particular pedal you've connected to the instrument. If necessary, change the pedal polarity to reverse the control (page 96). 4 Press the SONG CONTROL [REC] button. The Channel On/Off (Song) display appears. While holding down the [REC] button, press the [1 ]- [8 ] buttons to set the desired channel to "Rec." 5 Press the SONG CONTROL [F/ K] (PLAY/PAUSE) button to start Punch In/Out recording. According to the settings in step 3, play the keyboard between the Punch In and Punch Out points. Refer to the examples of various settings illustrated below. 6 Press the [8 ] (Save) button to carry out the Save operation. For details, refer to "Basic Operations" in the Owner's Manual. NOTICE The recorded Song data will be lost if you select another Song or turn off the power to the instrument without carrying out the Save operation. NEXT PAGE 62 PSR-SX600 Reference Manual