Yamaha PSR-SX600 PSR-SX600 Reference Manual - Page 40
Style Assembly Assembly, If necessary, select the to be edited in the Assembly pa
View all Yamaha PSR-SX600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Styles Style Assembly (Assembly) This allows you to copy channel data as a Source Pattern from another preset Style to the currently created Style. Use this function if you find a favorite rhythm pattern, bass line, chord backing or phrase from another Style. The instructions below apply to step 5 of the Basic Procedure on page 35. After selecting a Section and make other settings on the Basic page, carry out the instructions below. 1 If necessary, select the Section to be edited in the Assembly page. Even if the Section to be edited has already been selected on the Basic page, you can change the Section also on this page. Press the desired Section button on the panel to call up the Section window, then press the [8 ] (OK) button to actually enter the selection. If you want to select a fill-in section (which has no panel button), press any one of the Section buttons and use the [5 ]/[6 ] buttons to select a fill-in, then press the [8 ] (OK) button. 2 NOTE Intro 4 and Ending 4 can be selected on the display then created as your original Style although they are not available on the panel. 2 Replace the Source Pattern of the specific channel with that of another Style. 2-2 2-1 2-3 2-4 2-5 2-1 Select the desired channel to be replaced via the Cursor buttons 2-2 Press the [ENTER] button to call up the Style Selection display. 2-3 Select the desired Style, then press the [EXIT] button to return to the original display. 2-4 Select the Section and Channel of the selected Style via the [2 ]-[5 ] buttons. 2-5 Confirm the sound with the newly assigned Source Pattern by pressing the STYLE CON- TROL [START/STOP] button to playback the Style. NEXT PAGE 40 PSR-SX600 Reference Manual