Yamaha PSR-SX600 PSR-SX600 Reference Manual - Page 108
Confi, External connection-related settings, Fade In/Out, Display-related settings
View all Yamaha PSR-SX600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
2 External connection-related settings [3 ]/ AUX In Noise Gate Turns on or off the Noise Gate which minimizes noise of the sound input via the [4 ] [AUX IN] jack. [5 ]/ Audio Loopback [6 ] Determines whether audio input from the connected computer or smart device is output to a computer or a smart device or not. For details, refer to the Owner's Manual, Chapter 9. 3 Fade In/Out These parameters determine how Style or Song playback is faded in/out when using the [FADE IN/OUT] button. The settings here become effective also when the Fade In/Out function is assigned in the pedal settings (page 95). [2 ]/ Fade In Time [3 ] Determines the time it takes for the volume to fade in, or go from minimum to maximum (range of 0-20.0 seconds). [4 ]/ Fade Out Time [5 ] Determines the time it takes for the volume to fade out, or go from maximum to minimum (range of 0-20.0 seconds). [6 ]/ Fade Out Hold [7 ] Time Determines the time the volume is held at 0 following the fade out (range of 0-5.0 seconds). Config2 Use the Cursor buttons [][] to select the desired parameter. Function (Menu) 10 1 Display-related settings [2 ]/ Style Tempo [3 ] [4 ]/ Voice Number [5 ] [6 ]/ Time Stamp [7 ] NEXT PAGE Determines whether the default tempo of each preset Style is shown or hidden above the Style name in the Style Selection display. NOTE This setting is applied only to Preset Styles. Determines whether the Voice bank and number are shown or hidden in the Voice Selection display. Displaying these is helpful when you want to check which bank select MSB/LSB values and program change number you need to specify when selecting the Voice from an external MIDI device. NOTE The numbers displayed here start from "1." Accordingly the actual MIDI program change numbers are one lower, since that number system starts from "0." NOTE This setting is applied only to Preset Voices. Determines whether the updated date and time are shown or hidden on the File Selection display. When you connect the instrument to the network with the Infrastructure Mode (page 105) by using the USB wireless adaptor (UD-WL01), the instrument gets the "clock" information and the current timestamp (date and time) is recorded to the files you save to the instrument. Once you turn the power off, the clock is set to the factory default and will not be updated unless the instrument is connected to the network. NOTE This setting does not affect Preset files. 108 PSR-SX600 Reference Manual