Yamaha RX-V563 Owner's Manual - Page 32
to display the, Speaker level - problems
UPC - 027108929972
View all Yamaha RX-V563 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
p Optimizing the speaker setting for your listening room The display changes as follows. AUTO SETUP SETUP;;;;;;;AUTO . START Automatic Processing of all item [ ]/[ ]:Up/Down [ENTER]:Start 7 Press 8k and 8ENTER to display the setup results in detail. 8 Press 8l / h repeatedly to toggle between the setup result displays. Results of the speaker connection and wiring [ p AUTO SETUP INITIALIZING . WIRING/LEVEL DISTANCE SIZE WAITING Exit Results of the speaker distance from the listening position Results of the speaker size AUTO SETUP RESULT SP : 3/2/0.1 DIST: 3.2/3.5m LVL : -2/+2dB . >SET CANCEL [ ]/[ ]:Up/Down [ENTER]:Enter The results displayed under "RESULT" are as follows. Number of speakers SP Displays the number of speakers connected to this unit in the following order: Front/Back/Subwoofer Speaker distance DIST Displays the speaker distance from the listening position in the following order: Closest speaker distance/Farthest speaker distance Speaker level LVL Displays the speaker output level in the following order: Lowest speaker output level/Highest speaker output level Notes • If "E-9:INTERNAL ERROR" appears during the testing procedure, restart from step 4. • If you selected "RELOAD" in step 4, no test tones are output. • If an error occurs during the "AUTO SETUP" procedure, the setup procedure is canceled and an error screen appears. For details, see "If an error screen appears" on page 29. • When this unit detects potential problems during the "AUTO SETUP" procedure, "WARNING" and the number of warning messages appears (see page 29). Results of the speaker output level y If you are not satisfied with the results or want to manually adjust each parameter, run "MANUAL SETUP" (see page 63). Note The distances displayed in the "DISTANCE" results may be longer than the actual distance depending on the characteristics of your speakers. 9 Press 8ENTER to return to the result display. AUTO:RESULT . RESULT SP : 3/2/0.1 DIST: 3.2/3.5m LVL : -2/+2dB >SET CANCEL [ ]/[ ]:Up/Down [ENTER]:Detail 28 En