Yamaha YAS-408 MusicCast BAR 400 YAS-408 Owners Manual - Page 53
Initializing the unit, Connecting to a network using the WAC function, CONNECT on the unit - factory reset
View all Yamaha YAS-408 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Initializing the unit Reset the settings of the unit to the factory presets. 1 Turn off the unit. 2 Touch and hold | and z/CONNECT on the unit until all indicators flash. 1 Display Wi-Fi settings on the iOS device and select the unit from "SETUP A NEW AIRPLAY SPEAKER...". Flash (initialized) Connecting to a network using the WAC function When the unit is turned on for the first time after purchase, the * indicator on the center unit flashes slowly. While the * indicator is flashing, network settings from your iOS device (an iPhone, etc.) can be applied to the unit to connect the unit to a wireless network (WAC function). NOTE The * indicator does not flash if the unit's NETWORK jack is connected to a router using a cable (wired connection). Name of the unit 2 When the following screen is displayed, select the network (access point) to which the unit will be connected. Tap to connect to the selected network Name of the selected network Name of the unit NOTE If the unit is connected to a network using the MusicCast CONTROLLER app, network settings will be changed to those of the MusicCast CONTROLLER app. 53 En