Yamaha YAS-408 MusicCast BAR 400 YAS-408 Owners Manual - Page 60
When any problem appears (Audio), No sound, No sound is coming from the subwoofer
View all Yamaha YAS-408 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
When any problem appears (Audio) No sound l Another input source is selected. Select an appropriate input source. For details, see the following: - "Basic procedure for playback" (p.27) l The mute function is activated. Cancel the mute function. For details, see the following: - "Basic procedure for playback" (p.27) l The volume is too low. Turn up the volume. For details, see the following: - "Basic procedure for playback" (p.27) l The power cord of the unit is not connected properly. Make sure that the power cord of the unit is connected to an AC wall outlet securely. For details, see the following: - "Connecting the power cord" (p.21) l Input jacks on a playback device are connected. Connect the input jack on the unit and the output jack on the playback device. l Signals that the unit cannot play back are being input. Change the digital audio output setting on the playback device to PCM, Dolby Digital or DTS. l The unit is configured so that HDMI audio input signals are output from the TV. Configure the unit so that HDMI audio input signals are output from the unit. For details, see the following: - "Configuring HDMI audio output" (p.45) l The HDMI control function is disabled. When connecting a TV that supports ARC (Audio Return Channel) to the unit using an HDMI cable only, enable the HDMI control function. To output audio signals from the unit with the HDMI control function disabled, connect the TV's audio output jack to the unit's TV input jack (optical digital) via the optical digital audio cable. For details, see the following: - "Configuring the HDMI control function" (p.44) - "Connecting a TV that does not support Audio Return Channel (ARC)" (p.19) l Sound from an HDMI control-enabled TV is set for output from the TV's built-in speakers. Use the TV's HDMI settings to set audio output to any option other than the TV's built-in speakers. No sound is coming from the subwoofer l The subwoofer is not connected to an AC wall outlet. Plug in the power cord of the subwoofer to an AC wall outlet. For details, see the following: - "Connecting the power cord" (p.21) l The protection circuitry in the subwoofer has been activated. To protect the product, the power of the subwoofer cannot be turned on. Unplug the power cord from the AC wall outlet and contact the nearest authorized Yamaha dealer or service center. l The playback source does not contain low-frequency signals. Play back a sound source containing low-frequency signals, and confirm that the sound is output from the subwoofer. 60 En