ZyXEL LTE5121 User Guide - Page 54
Network Setting > Wireless > WPS, Enable, Apply
View all ZyXEL LTE5121 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Chapter 5 Wireless Click Network Setting > Wireless > WPS. The following screen displays. Select Enable and click Apply to activate the WPS function. Then you can configure the WPS settings in this screen. Figure 29 Network Setting > Wireless > WPS The following table describes the labels in this screen. Table 14 Network Setting > Wireless > WPS LABEL DESCRIPTION Enable WPS Select Enable and click Apply to activate WPS on the LTE Device. Add a new device with WPS Method - These fields display after you enable WPS and click Apply. Method 1 PBC Use this section to set up a WPS wireless network using Push Button Configuration (PBC). WPS Click this button to add another WPS-enabled wireless device (within wireless range of the LTE Device) to your wireless network. This button may either be a physical button on the outside of device, or a menu button similar to the WPS button on this screen. Method 2 PIN Note: You must press the other wireless device's WPS button within two minutes of pressing this button. Use this section to set up a WPS wireless network by entering the PIN (Personal Identification Number) of the client into the LTE Device. 54 LTE-5121 User's Guide