ZyXEL LTE5121 User Guide - Page 76

Chapter 6 Home Networking Use this screen to change your LTE Device's static DHCP settings. Click Network Setting > Home Networking > Static DHCP to open the following screen. Figure 40 Network Setting > Home Networking > Static DHCP The following table describes the labels in this screen. Table 21 Network Setting > Home Networking > Static DHCP LABEL Add new static lease # Status Host Name MAC Address DESCRIPTION Click this to add a new static DHCP entry. This is the index number of the entry. This field displays whether the client is connected to the LTE Device. This field displays the client host name. The MAC (Media Access Control) or Ethernet address on a LAN (Local Area Network) is unique to your computer (six pairs of hexadecimal notation). IP Address Reserve Apply Cancel Refresh A network interface card such as an Ethernet adapter has a hardwired address that is assigned at the factory. This address follows an industry standard that ensures no other adapter has a similar address. This field displays the IP address relative to the # field listed above. Select the check box in the heading row to automatically select all check boxes or select the check box(es) in each entry to have the LTE Device always assign the selected entries's IP address(es) to the corresponding MAC address(es) (and host name(s)). You can select up to 128 entries in this table. Click Apply to save your changes. Click Cancel to restore your previously saved settings. Click Refresh to reload the DHCP table. If you click Add new static lease in the Static DHCP screen, the following screen displays. Figure 41 Static DHCP: Add The following table describes the labels in this screen. Table 22 Static DHCP: Add LABEL DESCRIPTION MAC Address Enter the MAC address of a computer on your LAN. IP Address Enter the IP address that you want to assign to the computer on your LAN with the MAC address that you will also specify. 76 LTE-5121 User's Guide