ZyXEL LTE5121 User Guide - Page 96
Configuring Static Route
View all ZyXEL LTE5121 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Chapter 7 Static Route 7.2 Configuring Static Route Use this screen to view and configure IP static routes on the LTE Device. Click Network Setting > Static Route to open the following screen. Figure 65 Network Setting > Static Route The following table describes the labels in this screen. Table 29 Network Setting > Static Route LABEL Add New Static Route # Active DESCRIPTION Click this to set up a new static route on the LTE Device. This is the number of an individual static route. This indicates whether the rule is active or not. Status Name Destination IP Gateway Subnet Mask Modify A yellow bulb signifies that this static route is active. A gray bulb signifies that this static route is not active. This shows whether the static route is currently in use or not. A yellow bulb signifies that this static route is in use. A gray bulb signifies that this static route is not in use. This is the name that describes or identifies this route. This parameter specifies the IP network address of the final destination. Routing is always based on network number. This is the IP address of the gateway. The gateway is a router or switch on the same network segment as the device's LAN or WAN port. The gateway helps forward packets to their destinations. This parameter specifies the IP network subnet mask of the final destination. Click the Edit icon to go to the screen where you can set up a static route on the LTE Device. Click the Delete icon to remove a static route from the LTE Device. 96 LTE-5121 User's Guide