ZyXEL NBG6503 User Guide - Page 145

Remote Management

Page 145 highlights

CHAPTER 20 Remote Management 20.1 Overview This chapter provides information on the Remote Management screens. Remote Management allows you to manage your Router from a remote location through the following interfaces: • LAN and WAN • LAN only • WAN only Note: The Router is managed using the Web Configurator. 20.2 What You Can Do Use the WWW screen (Section 20.4 on page 146) to define the interface/s from which the Router can be managed remotely and specify a secure client that can manage the Router. 20.3 What You Need to Know Remote management over LAN or WAN will not work when: 1 The IP address in the Secured Client IP Address field (Section 20.4 on page 146) does not match the client IP address. If it does not match, the Router will disconnect the session immediately. 2 There is already another remote management session. You may only have one remote management session running at one time. 3 There is a firewall rule that blocks it. 20.3.1 Remote Management and NAT When NAT is enabled: • Use the Router's WAN IP address when configuring from the WAN. • Use the Router's LAN IP address when configuring from the LAN. NBG6503 User's Guide 145

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240

NBG6503 User’s Guide
145
C
HAPTER
20
Remote Management
20.1
Overview
This chapter provides information on the Remote Management screens.
Remote Management allows you to manage your Router from a remote location through the
following interfaces:
LAN and WAN
LAN only
WAN only
Note: The Router is managed using the Web Configurator.
20.2
What You Can Do
Use the
WWW
screen (
Section 20.4 on page 146
) to define the interface/s from which the Router
can be managed remotely and specify a secure client that can manage the Router.
20.3
What You Need to Know
Remote management over LAN or WAN will not work when:
1
The IP address in the
Secured Client IP Address
field (
Section 20.4 on page 146
)
does not
match the client IP address. If it does not match, the Router will disconnect the session
immediately.
2
There is already another remote management session. You may only have one remote
management session running at one time.
3
There is a firewall rule that blocks it.
20.3.1
Remote Management and NAT
When NAT is enabled:
Use the Router’s WAN IP address when configuring from the WAN.
Use the Router’s LAN IP address when configuring from the LAN.