ZyXEL NBG6503 User Guide - Page 90

MAC Filter

Page 90 highlights

Chapter 10 Wireless LAN 10.4.3 WPA-PSK/WPA2-PSK Click Network > Wireless LAN 2.4G or Wireless LAN 5G to display the General screen. Select WPA-PSK or WPA2-PSK from the Security Mode list. Figure 62 Network > Wireless LAN 2.4G/5G> General: WPA-PSK/WPA2-PSK The following table describes the labels in this screen. Table 34 Network > Wireless LAN 2.4G/5G > General: WPA-PSK/WPA2-PSK LABEL DESCRIPTION Security Mode WPA-PSK Compatible Pre-Shared Key Select WPA-PSK or WPA2-PSK to enable data encryption. This field appears when you choose WPA-PSK2 as the Security Mode. Check this field to allow wireless devices using WPA-PSK security mode to connect to your Router. WPA-PSK/WPA2-PSK uses a simple common password for authentication. Group Key Update Timer Apply Cancel Type a pre-shared key from 8 to 63 case-sensitive keyboard characters. The Group Key Update Timer is the rate at which the AP sends a new group key out to all clients. Click Apply to save your changes back to the Router. Click Cancel to reload the previous configuration for this screen. Refer to Table 31 on page 86 for descriptions of the other labels in this screen. 10.5 MAC Filter The MAC filter screen allows you to configure the Router to give exclusive access to devices (Allow) or exclude devices from accessing the Router (Deny). Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six 90 NBG6503 User's Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240

Chapter 10 Wireless LAN
NBG6503 User’s Guide
90
10.4.3
WPA-PSK/WPA2-PSK
Click
Network
>
Wireless LAN 2.4G
or
Wireless LAN 5G
to display the
General
screen. Select
WPA-PSK
or
WPA2-PSK
from the
Security Mode
list.
Figure 62
Network > Wireless LAN 2.4G/5G> General: WPA-PSK/WPA2-PSK
The following table describes the labels in this screen.
Refer to
Table 31 on page 86
for descriptions of the other labels in this screen.
10.5
MAC Filter
The MAC filter screen allows you to configure the Router to give exclusive access to devices (Allow)
or exclude devices from accessing the Router (Deny). Every Ethernet device has a unique MAC
(Media Access Control) address. The MAC address is assigned at the factory and consists of six
Table 34
Network > Wireless LAN 2.4G/5G > General: WPA-PSK/WPA2-PSK
LABEL
DESCRIPTION
Security Mode
Select
WPA-PSK
or
WPA2-PSK
to enable data encryption.
WPA-PSK
Compatible
This field appears when you choose
WPA-PSK2
as the
Security Mode
.
Check this field to allow wireless devices using
WPA-PSK
security mode to connect to your
Router.
Pre-Shared Key
WPA-PSK/WPA2-PSK
uses a simple common password for authentication.
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
Group Key
Update Timer
The
Group Key Update Timer
is the rate at which the AP
sends a new group key out to all
clients.
Apply
Click
Apply
to save your changes back to the Router.
Cancel
Click
Cancel
to reload the previous configuration for this screen.