ZyXEL NBG6503 User Guide - Page 28
WPA-PSK, WPA2-PSK
View all ZyXEL NBG6503 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Chapter 2 Connection Wizard The following table describes the labels in this screen. Table 7 Wireless Security: No Security LABEL DESCRIPTION Wireless Radio Select a wireless radio from the drop-down list box. Wireless Network Name (SSID) Security mode Choose 2.4G Hz to set the security setting for the wireless 2.4G band. Choose 5G Hz to set the security setting for the wireless 5G band. Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN. If you change this field on the Router, make sure all wireless stations use the same SSID in order to access the network. Select a Security level from the drop-down list box. Exit Back Next Choose None to have no wireless LAN security configured. If you do not enable any wireless security on your Router, your network is accessible to any wireless networking device that is within range. Click this to close the wizard screen without saving. Click this to return to the previous screen. Click this to continue. 2.5.2 Wireless Security: WPA-PSK/WPA2-PSK Choose WPA-PSK or WPA2-PSK security in the Wireless Security screen to set up a password for your wireless network. Figure 13 Wireless Security: WPA-PSK/WPA2-PSK The following table describes the labels in this screen. Table 8 Wireless Security: WPA-PSK/WPA2-PSK LABEL DESCRIPTION Wireless Radio Select a wireless radio from the drop-down list box. Wireless Network Name (SSID) Choose 2.4G Hz to set the security setting for the wireless 2.4G band. Choose 5G Hz to set the security setting for the wireless 5G band. Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN. If you change this field on the Router, make sure all wireless stations use the same SSID in order to access the network. 28 NBG6503 User's Guide