ZyXEL NWD-370N User Guide - Page 48
Infrastructure, WPA-PSK, WPA2-PSK, Ad-Hoc, DISABLE
View all ZyXEL NWD-370N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
ZyXEL NWD-370N User's Guide The following table describes the labels in this screen. Table 15 Profile: Wireless Settings LABEL DESCRIPTION Wireless Settings Wireless Mode Channel This is the wireless standard the NWD-370N uses. In Ad-Hoc mode, you can use only 802.11g. Select a channel number from the drop-down list box. To associate to an ad-hoc network, you must use the same channel as the peer computer. 3 If you selected Infrastructure network type in the first screen, select WEP, WPA, WPA2, WPA-PSK, WPA2-PSK or 802.1x from the drop-down list box to enable data encryption. If you selected Ad-Hoc network type in the first screen, you can use only WEP encryption method. Otherwise, select DISABLE to allow the NWD-370N to communicate with the access points or other peer wireless computers without any data encryption, and skip to step 5. Figure 30 Profile: Wireless Settings 4 The screen varies depending on the encryption method you select in the previous screen. The settings must be exactly the same on the APs or other peer wireless computers as they are on the NWD-370N. Refer to Section 4.3.1 on page 39 for detailed information on wireless security configuration. 48 Chapter 4 Wireless Configuration