ZyXEL P-335U User Guide - Page 183
Rule Configuration with the User-defined Service
View all ZyXEL P-335U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
P-334U/P-335U User's Guide 15.9.2 Rule Configuration with the User-defined Service In addition to the pre-defined services, if you want to edit a bandwidth management rule for other applications and/or subnets, click the Edit icon in the User-defined Service table of the Advanced screen. The following screen displays. Figure 107 Bandwidth Management Rule Configuration: User-defined Service The following table describes the labels in this screen. Table 69 Bandwidth Management Rule Configuration: User-defined Service LABEL BW Budget Destination Address Destination Subnet Netmask Destination Port Source Address Source Subnet Netmask Source Port Protocol OK Cancel DESCRIPTION Select Maximum Bandwidth or Minimum Bandwidth and specify the maximum or minimum bandwidth allowed for the rule in kilobits per second. Enter the destination IP address in dotted decimal notation. Enter the destination subnet mask. This field is N/A if you do not specify a Destination Address. Refer to the appendices for more information on IP subnetting. Enter the port number of the destination. See Table 64 on page 176 for some common services and port numbers. Enter the source IP address in dotted decimal notation. Enter the destination subnet mask. This field is N/A if you do not specify a Source Address. Refer to the appendices for more information on IP subnetting. Enter the port number of the source. See Table 64 on page 176 for some common services and port numbers. Select the protocol (TCP or UDP) or select User defined and enter the protocol (service type) number. Click OK to save your customized settings. Click Cancel to exit this screen without saving. Chapter 15 Bandwidth Management 183