ZyXEL P-335U User Guide - Page 79
Wireless Client
View all ZyXEL P-335U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
P-334U/P-335U User's Guide The following table describes the labels in this screen. Table 28 OTIST LABEL Setup Key DESCRIPTION Type an OTIST Setup Key of exactly eight ASCII characters in length. The default OTIST setup key is "01234567". Note: If you change the OTIST setup key here, you must also make the same change on the wireless client(s). Yes! If you want OTIST to automatically generate a WPA-PSK, you must: • Change your security to No Security in the Wireless LAN > General screen. • Select the Yes! checkbox in the OTIST screen and click Apply. • The wireless screen displays an auto generated WPA-PSK and is now in WPA-PSK security mode. The WPA-PSK security settings are assigned to the wireless client when you start OTIST. Note: If you already have a WEP key or WPA-PSK configured in the Wireless LAN > General screen, and you run OTIST with Yes! selected, OTIST will use the existing WEP key or WPA-PSK. Start Click Start to encrypt the wireless security data using the setup key and have the ZyXEL Device set the wireless station to use the same wireless settings as the ZyXEL Device. You must also activate and start OTIST on the wireless station within three minutes. 4.4.1.2 Wireless Client Start the ZyXEL utility and click the Adapter tab. Select the OTIST check box, enter the same Setup Key as your AP's and click Save. Figure 40 Example Wireless Client OTIST Screen Chapter 4 Wireless LAN 79