ZyXEL Vantage CNM Quick Start Guide - Page 15
Adding a Managed Device to Vantage CNM, 1 ZyNOS and Encrypt Traffic Commands
View all ZyXEL Vantage CNM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
ENGLISH Table 1 ZyXEL Device and Firmware version Vantage CNM Supports ZyXEL Device Firmware Version ZyNOS ZyWALL: ZyNOS (ZyXEL Networking Operation System) is a ZyXEL proprietary system. ZyWALL 2 3.62 ZyWALL 5 / 35 / 70 / 2 Plus 4.00 or later ZyWALL 2WG 4.02 or later ZLD ZyWALL: ZLD (ZyXEL Linux Distribution) is a ZyXEL's platform based on Linux. ZyWALL 1050 2.01 or later ZyWALL USG 100 / 200 / 2000 ZyWALL USG 300 / 1000 P-662H(W)-D1 / P-662H(W)-61 / P-662HW-63 / P-653HWI-17 2.10 2.01 or later 3.40 8 Adding a Managed Device to Vantage CNM You have to configure each ZyXEL device to send its log entries to the Vantage CNM server (See 8.1, 8.2, 8.3, 8.4), and you have to add each device to Vantage CNM (See 8.5). In the ZyXEL device, you can configure CNM agent settings using commands and/or the web configurator. 8.1 ZyNOS and Encrypt Traffic Commands Go to command mode (SMT menu 24.8 of most ZyXEL devices) and issue the following command: Enter cnm active. If cnm active 0 displays then Vantage CNM is disabled on the ZyXEL device. To enable Vantage CNM on the device 1 Enter cnm active 1. 2 Enter cnm managerIp x.x.x.x on the ZyXEL device where x.x.x.x is the public IP address of the Vantage CNM server. 3 To encrypt traffic between Vantage CNM and the ZyXEL device, type 'cnm encry X xxxxxxxxx'. Where X = 0 is no encryption, X =1 is DES encryption, X = 2 is 3DES encryption. If X = 1 or 2, 'xxxxxxxxx' is the alphanumeric encryption key ("0" to "9", "a" to "z" or "A" to "Z") in the Vantage CNM server. Type an eight-character alphanumeric key ("0" to "9", "a" to "z" or "A" to "Z") for DES encryption and a 24-character alphanumeric key for 3DES encryption. 14