1998 Chevrolet Express Van Owner's Manual - Page 106

Turn Signal and Lane Change Signals The turn signal has two upward (for right) and two downward (for left) positions. These positions allow you to signal a turn or a lane change. As you signal a turn or a lane change, if the arrows flash at twice the normal rate, a signal bulb may be burned out and other drivers may not see your turn signal. If a bulb is burned out, replace it to help avoid an accident. If the arrows don't goon at all when you signal a turn, check for burned-out bulbs anda blown in fuse (see "Fuses and Circuit Breakers" the Index). To signal a turn, move thelever all the way up or down. When the turn is finished, the lever will return automatically. H LI An arrow on the instrument panel will flash in the direction of the turnor lane change. Headlamp High/Low Beam Changer To change the headlamps fromlow beam to high or high to low, pull the multifunction lever all the way toward you. Then release it. When the high beams are on, this light on the instrument panel also will be on. To signal a lane change, just raise or lower the lever until the arrow starts to flash. Hold it there until you complete your lane change. The lever will return by itself when yourelease it. 2-35