1998 Chevrolet Express Van Owner's Manual - Page 150

FWD (6): Press this button to rapidly forward the tape to the end of the cassette or until you pressFWD again. The radio will play thelast selected station while forwarding the tape. The tape direction arrow willblink during the forward operation. CD Adapter Kits It is possible to use a CD adapter kit withyour cassette tape player after activating the bypass feature on your tape player. To activate the bypass feature, use the following steps: 1. Turn the ignition to RUN or ACC. AM-FM: Press this button to switch from a tape to the radio. TAPE AUX: Press this buttonto return to the tape player when playing the radio. The lighted arrow will appear and show the direction of play when a tape is in the active mode. 2. Turn the radio off. 3. Press and hold the TAPEAUX button for five seconds. The tape symbol on the display will flash for two seconds, indicating the feature is active. 4. Insert the adapter while the tape symbol is flashing. EJECT Press this button to remove the tape. The radio will now play.EJECT can beused with either the ignition or radio off. To load a cassette tape with the ignition or radio off, press EJECT before loading the cassette. It will power up theradio and begin playing. This override routine will remain active until EJECT is pressed. CLN: If this message appears on the display, the cassette tape player needs to be cleaned. It will still play tapes, but you should clean it as soon as possible to prevent damage to the tapes and player. See "Care of Your Cassette Tape Player" in theIndex. After you clean the player, press and holdEJECT for fiveseconds to reset the CLN indicator. The radio will display --- to show the indicator was reset. 3-15