2012 Subaru Forester Owner's Manual - Page 117

Seat, seatbelt and SRS airbags 1-9 ! Rear windows side seating position CAUTION The head restraint is not intended to be used at the lowest position. Before sitting on the seat, raise the head restraint to an appropriate position depending on your sitting height. To lower: Push the head restraint down while pressing the release button on the top of the seatback. To remove: While pressing the release button, pull out the head restraint. To install: Install the head restraint into the holes that are located on the top of the seatback until the head restraint locks. When the seats are not occupied, lower the head restraints to improve rearward visibility. ! Rear center seating position A) B) When not used (retracted position) When used (extended position) CAUTION The head restraint is not intended to be used at the lowest position. Before sitting on the seat, raise the head restraint to the extended position. 1) 2) Head restraint Release button The head restraint should be adjusted so that the center of the head restraint is closest to the top of the occupant's ears. To raise: Pull the head restraint up. 1) 2) Head restraint Release button To raise: Pull the head restraint up. - CONTINUED -