2012 Subaru Forester Owner's Manual - Page 368

7-34 Starting and operating . Push the "CRUISE" main switch button again. . Turn the ignition switch to the "Acc" or " LOCK" position (but only when the vehicle is completely stopped). & To change the cruising speed ! To increase the speed (by button) . Push the "CANCEL" button. . Depress the brake pedal. . Depress the clutch pedal (MT models). . Shift the select lever into the "N" position (AT models). . Shift the shift lever into neutral position (MT models). The cruise control set indicator light on the combination meter turns off when the cruise control is canceled. To resume the cruise control after it has been temporarily canceled, push the "RES/ACC" button. The vehicle will return to the original cruising speed automatically and the cruise control set indicator light on the combination meter will illuminate. NOTE If the vehicle speed has decreased below approximately 20 mph (32 km/h), the previously set cruising speed is canceled completely and resetting of the cruising speed is required. Push the "RES/ACC" button and hold it until the vehicle reaches the desired speed. Then, release the button. The vehicle speed at that moment will be memorized and treated as the new set speed. When the difference between the actual vehicle speed and the set speed is less than 4 mph (6.8 km/h), the set speed can be increased 1 mph (1.6 km/h) each time & To turn off the cruise control There are two ways to turn off the cruise control: