2012 Subaru Forester Owner's Manual - Page 301

Audio 5-45 If there is detrimental radio interference from this equipment to "other radio stations," move the equipment to another location as soon as possible to avoid radio interference. The frequency band used by this equipment is in the 2.4 GHz zone. The FH-SS modulation is employed as a modulation method. The expected inflicting interference distance is less than 10 m (33 ft). This equipment uses a full band and can avoid a band used by a movable body identification device. & Using the Hands-free system ! Turning on/off the Hands-free mode 1) 2) 3) OFF hook switch ON hook switch Talk switch operating the "TUNE/TRACK/CH" dial. Then "WELCOME!" will be displayed. 3. Press the "TUNE/TRACK/CH" dial or the talk switch . 4. Select the "RECORD NAME" menu. 5. Say the name to be registered. 6. Select the "CONFIRM" menu. After "CAR M_MEDIA" is displayed, a pass key is displayed. 7. Input the displayed pass key into the cell phone while "PKY: ****" (type C audio)/"PASS KEY: ****" (type D audio) is displayed. If you input the correct pass key, " PAIRED " is displayed and the registration procedure is finished. If you input an incorrect pass key, "FAILED" is displayed and the registration procedure was not successful. To turn on the Hands-free mode, press the OFF hook switch . To turn off the Hands-free mode, press the ON hook switch . ! Preparation for using the Handsfree system Before using the Hands-free system, it is necessary to register a cell phone in the system. Perform the following procedure to register a cell phone. 1. Press the OFF hook switch . 2. Select "ENGLISH"/"FRANÇAIS" by NOTE When the ignition switch is turned to the "Acc" or "ON" position, the registered cell phone will be automatically connected to the system. ! Menu list of the Hands-free system Turn the "TUNE/TRACK/CH" dial to select a menu, and then press the dial to enter the selected menu. - CONTINUED -