2012 Subaru Forester Owner's Manual - Page 189

Keys and doors 2-21 To close: Pull the switch up lightly and hold it. The window will close as long as the switch is held. This switch also has a one-touch auto up function that allows the window to be closed fully without holding the switch. Pull the switch up until it clicks and release it, and the window will fully close. To stop the window halfway, press the switch down lightly. ! Operating the driver 's window (type B) To close: Pull the switch up lightly and hold it. The window will close as long as the switch is held. ! Anti-entrapment function (type A) CAUTION . Never attempt to test this function using fingers, hands or other parts of your body. . The anti-entrapment function may not operate properly if an object gets trapped just before the window fully closes. 1) 2) 3) Open Automatically open Close NOTE If the vehicle's battery is disconnected due to situations such as battery or fuse replacement, the one-touch auto up/down function is deactivated. Initialize the power window to reactivate the one-touch auto up/down function. Refer to "Initialization of power window (type A)" F2-23. NOTE . If a window detects an impact similar to that caused by trapping an object (for example, when the vehicle is driven over a deep pothole), the anti-entrapment function may operate. . The window cannot be operated for a few seconds after the anti-entrapment function operates. . If the vehicle's battery is disconnected due to situations such as battery or fuse replacement, the antientrapment function is deactivated. Initialize the power window to reactivate the anti-entrapment function. Re- CONTINUED - To open: Push the switch down lightly and hold it. The window will open as long as the switch is held. This switch also has a one-touch auto down function that allows the window to be opened fully without holding the switch. Push the switch down until it clicks and release it, and the window will fully open. To stop the window halfway, pull the switch up lightly.