2012 Subaru Forester Owner's Manual - Page 470

11-48 Maintenance and service surface. Turn the bulb clockwise until it clicks. 5. Reconnect the electrical connector. 6. Install the air intake duct with clips (right-hand side). & Front turn signal light It may be difficult to replace the bulbs. Have the bulbs replaced by your SUBARU dealer if necessary. & Position light & Rear combination lights 2. Disconnect the electrical connector from the bulb. 1. Turn the bulb socket counterclockwise and pull out the socket. 2. Pull the bulb out of the socket. 3. Install a new bulb. 4. Install the bulb socket by turning it clockwise. 3. Remove the bulb from the headlight assembly by turning it counterclockwise. 4. Replace the bulb with new one. At this time, be careful not to touch the bulb 1. Using a Phillips screwdriver, remove the upper and lower screws that secure the rear combination light assembly.