2012 Subaru Forester Owner's Manual - Page 296

5-40 Audio & MUTE button (models without Hands-free system) Bluetooth® audio (type C and D audio) This function enables you to play back audio sources from Bluetooth® audio devices. You need to register the Bluetooth® audio device in the system before using it. Profile) . AVRCP (Audio/Video Remote Control Profile) & Setting Bluetooth® audio 1. Select "BT-A SETUP" by pressing the "MENU" button (type C audio)/Select "BT Audio Setup" by operating the "TUNE/ TRACK/CH" dial (type D audio). 2. Perform the following procedure by operating the "TUNE/TRACK/CH" dial while "BT-A" (type C audio)/"BT Audio" (type D audio) is displayed. Press the " " button if you wish to immediately cut the volume to zero. The audio display will show "MUTE". If you press the button again, the original sound volume will return and "MUTE" turns off. NOTE You cannot set a Bluetooth® audio while driving. ! Registering (pairing) device 1. Select the "PAIR AUDIO" (type C audio)/"Pair Audio Player" (type D audio) menu. If a device is already registered, "MEMORY FULL" is displayed and the mode changes to the Bluetooth® audio setting mode. 2. After the passkey is shown on the display, input the passkey into the device. If you input the correct passkey, "PAIRED" is displayed and the registering procedure is finished. If you input an incorrect passkey, "FAILED" is displayed, the re- NOTE The Bluetooth word mark and logo are registered trademarks of Bluetooth SIG, Inc. & Media format Bluetooth® audio devices cannot be connected if they are not compatible with the following Bluetooth® profiles. . A2DP (Advanced Audio Distribution