2012 Subaru Forester Owner's Manual - Page 275

Audio 5-19 NOTE The channel guide is not yet updated if the update is done while receiving the Sirius XMTM satellite radio signal. To complete the update, turn the ignition switch to the "LOCK" position and then to the "ACC" or "ON" position. & Displaying satellite radio ID of tuner . If you are driving in a tunnel or a covered parking area . If you are driving beneath the top level of a multi-level freeway . If you drive under a bridge . If you are driving next to a tall vehicle (such as a truck or a bus) that blocks the signal . If you are driving in a valley where the surrounding hills or peaks block the signal from the south . If you are driving on a mountain road where the southern direction is blocked by mountains . If you are driving in an area with tall trees that block the signal (10 m or more), for example on a road that goes through a dense forest . The signal can become weak in some areas that are not covered by the repeater station network. Please note that these may be other unforeseen circumstances when there are problems with the reception of Sirius XMTM satellite radio signals. When you activate satellite radio, you should have your satellite radio tuner ID ready because each tuner is identified by its unique satellite radio tuner ID. The satellite radio ID will be needed when you activate satellite radio and receive satellite radio customer support. The satellite radio ID can be found on the audio display by tuning the channel to "0". Turn the "TUNE/TRACK/CH" dial to select the satellite radio channel. NOTE For Sirius, change the display to an indication mode other than the channel number after performing the above operation. - CONTINUED -