2012 Subaru Forester Owner's Manual - Page 469

Maintenance and service 11-47 2. Use a Phillips screwdriver to remove the secured clip of the washer tank. To make it easy to access the bulb, move the washer tank to the horizontal direction (left-hand side). 7. To install the bulb to the headlight assembly, turn it clockwise until it clicks. 8. Reconnect the electrical connector. 9. Install the bulb cover. 10. Install the air intake duct with clips (right-hand side). 11. Set the washer tank to the original place and secure it by clip (left-hand side). ! High beam light bulbs 4. Disconnect the electrical connector from the bulb. 3. Remove the bulb cover by turning it counterclockwise. Right-hand side 1. Use a screwdriver to undo the clips on the air intake duct, then remove the air intake duct (right-hand side). 5. Remove the bulb from the headlight assembly by turning it counterclockwise. 6. Replace the bulb with a new one. At this time, do not touch the bulb surface. - CONTINUED -