2012 Subaru Forester Owner's Manual - Page 191

Keys and doors 2-23 & Initialization of power window (type A) If the vehicle's battery is disconnected due to situations such as battery or fuse replacement, the following functions are deactivated. . One-touch auto up/down function . Anti-entrapment function Initialize the power window using the following procedure to reactivate these functions. 1. Close the driver 's door. 2. Turn the ignition switch to the "ON" position. 3. Open the driver 's side window halfway by pushing down the power window switch. 4. Pull up the power window switch and close the window completely. Continue pulling up the switch for approximately 1 second after the window is closed completely. Rear gate The rear gate can be locked and unlocked using any of the following systems. . Power door locking switch: Refer to "Power door locking switches" F2-6. . Remote keyless entry system: Refer to "Remote keyless entry system" F2-7. To open: Unlock the rear gate and push the rear gate opener button. To close: Lower the rear gate slowly and push down firmly until the latch engages. The rear gate can be lowered easily if you pull it down holding the inside handle. WARNING . To prevent dangerous exhaust gas from entering the vehicle, always keep the rear gate closed while driving. - CONTINUED -