3Com 3CRWE454G72 User Guide - Page 29
Enter a Service Area Name/SSID., Service Area Name
View all 3Com 3CRWE454G72 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Accessing the Wizard 29 the number available to you is dependent on the country in which you reside. 1 Select a channel for the Access Point to use or Clear Channel Select if you want the Access Point to choose an unused channel on start-up. 2 Enter a Service Area Name/SSID. The Service Area Name default for 3Com products is "3Com". Up to 32 (case sensitive) characters can be entered for the Service Area Name. 3Com strongly recommends that you change the SSID to something other than the default. For information on improving your Wireless network security see "Wireless Settings" on page 39. If you are configuring the Access Point from a wireless computer any changes you make to the wireless configuration will result in communication between the Access Point and your computer being lost. This is why 3Com strongly recommends that you configure the Access Point from a wired computer. It is very important that you set up your wireless clients to use the same Service Area Name or SSID as the one you use on this screen. If your clients use a different Service Area Name then they will not be able to communicate with the Access Point. The choice of channel is less important as Clients will generally search all of the available channels. You should however make a note of the channel you select as this may be useful if you experience problems with your clients.