3Com 3CRWE454G72 User Guide - Page 42
Configuring WEP Encryption, Enabled - Manual Pre-shared Key, WPA Encryption Type, Apply
View all 3Com 3CRWE454G72 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
42 CHAPTER 4: ACCESS POINT CONFIGURATION Figure 27 Encryption Keys Screen showing WPA configuration To enter the pre-shared key as hexadecimal digits: 1 Select Enabled - Manual Pre-shared Key from the WPA Encryption Type drop-down box. 2 Enter a pair of hexadecimal digits in each of the 32 Key fields. Each field can contain a hexadecimal number from 00 to ff, for example 1a. 3 Click Apply to generate the key. To enter the pre-shared key as a pass-phrase: 1 Select Enabled - Pre-Shared Passphrase from the WPA Encryption Type drop-down box. 2 Enter a phrase of between 8 and 63 characters in length in the Passphrase field. This passphrase will be used to generate a 256 bit key. 3 Click Apply to generate the key. Configuring WEP Encryption There are two levels of WEP encryption available, 64 bit (sometimes referred to as 40 bit) and 128 bit. 128 bit will result in a higher level of security, but may cause a slight decrease in performance. Use the Wireless Encryption Type box to select the desired level.