3Com 3CRWE454G72 User Guide - Page 59

LAN Settings, Wireless Settings, Mask of your Access Point. - default address

Get 3Com 3CRWE454G72 - OfficeConnect Wireless 11g Access Point PDF manuals and user guides View all 3Com 3CRWE454G72 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

LAN Settings LAN Settings 59 The LAN Settings screen allows you to set the IP Address and Subnet Mask of your Access Point. Figure 40 Unit Configuration Screen To change the LAN settings for your Access Point: 1 Select Unit Configuration. The screen shown in Figure 40 is displayed. 2 Enter an IP Address and Subnet Mask in the LAN Settings field. The default static IP address of the Access Point is 192.168.1.1. You must set a static IP address for your Access Point when in Client Bridge mode. Client Bridge mode does not support DHCP. The Access Point must be allocated a free address within your wireless network's subnet to function correctly. 3 Check all of your settings, and then click Apply. Wireless Settings The Wireless Settings menu allows to enter the details of the wireless network to which you are connecting. These can be obtained from your network administrator.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
LAN Settings
59
LAN Settings
The LAN Settings screen allows you to set the IP Address and Subnet
Mask of your Access Point.
Figure 40
Unit Configuration Screen
To change the LAN settings for your Access Point:
1
Select
Unit Configuration
. The screen shown in
Figure 40
is displayed.
2
Enter an
IP Address
and
Subnet Mask
in the LAN Settings field. The
default static IP address of the Access Point is 192.168.1.1.
You must set a static IP address for your Access Point when in Client
Bridge mode. Client Bridge mode does not support DHCP. The Access
Point must be allocated a free address within your wireless network’s
subnet to function correctly.
3
Check all of your settings, and then click
Apply
.
Wireless Settings
The Wireless Settings menu allows to enter the details of the wireless
network to which you are connecting. These can be obtained from your
network administrator.