ATI X1900 User Guide - Page 98
Adaptive Anti-Aliasing, Catalyst™, Disable, Apply, Discard - crossfire
UPC - 727419413213
View all ATI X1900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
90 CrossFire™ 3 Adjust the Adaptive Anti-Aliasing control slider to the desired setting. Set Catalyst™ A.I. settings 1 From the Tree View pane, expand 3D. 2 Click Catalyst™ A.I. 3 If necessary, clear the check mark from Disable Catalyst™ A.I. 4 Click and drag to slider to the desired setting. Apply your settings 1 Click Apply to save your changes and leave the Catalyst™ Control Center open. 2 Click OK to save your changes and exit the Catalyst™ Control Center. Discard your settings • Click Discard to ignore any unsaved changes and restore the settings that existed when the Catalyst™ Control Center was opened or the last time Apply was used. Discard does not close the Catalyst™ Control Center. Clicking Discard applies to all features of an aspect, not just the feature in the current view. Change motherboard BIOS settings Some motherboards may have a system BIOS option to switch between single or dual PCIe™ slot support. The default setting may be single slot support. Refer to the motherboard's manual for information to enable dual PCIe™ slot support. For more information see the CrossFire™ Web page at: ati.com/crossfire CrossFire™ graphics card connections In order for CrossFire™ to function the interconnect cable must be correctly connected to both the Master and Slave graphics cards. 1 Connect the DMS-59™ connector of the interconnect cable to the DMS-59™ connection on the Master card.