Asus CUR-DLS CUR-DLS User Manual - Page 27
ASUS CUR-DLS User's Manual, Wake-On-LAN Connector 3-pin WOL_CON, Wake On LAN, PCI Modem card, Wake-
View all Asus CUR-DLS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
3. HARDWARE SETUP 12) Wake-On-LAN Connector (3-pin WOL_CON) This connector connects to a LAN card with a Wake-On-LAN output, such as the ASUS PCI-L101 Ethernet card (see 7. APPENDIX). The connector powers up the system when a wakeup packet or signal is received through the LAN card. IMPORTANT: This feature requires that Wake On LAN or PCI Modem card is enabled (see 4.5.1 Power Up Control) and that your system has an ATX power supply with at least 720mA +5V standby power. IMPORTANT: Requires an ATX power R supply with at least 720mA +5 volt CUR-DLS standby power WOL_CON +5 Volt Standby PME Ground CUR-DLS Wake-On-LAN Connector 13) Wake-On-Ring Connector (2-pin WOR) This connector connects to internal modem cards with a Wake-On-Ring output. The connector powers up the system when a ringup packet or signal is received through the internal modem card. NOTE: For external modems, Wake-On-Ring is detected through the COM port. IMPORTANT: This feature requires that Wake On LAN or PCI Modem card is enabled (see 4.5.1 Power Up Control) and that your system has an ATX power supply with at least 720mA +5V standby power. 3. H/W SETUP Connectors R CUR-DLS WOR 12 Ground Ring# CUR-DLS Wake-On-Ring Connector ASUS CUR-DLS User's Manual 27