Asus CUR-DLS CUR-DLS User Manual - Page 37
Bios Setup
View all Asus CUR-DLS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
4. BIOS SETUP 6. When prompted to confirm the BIOS update, press Y to start the update. 7. The utility starts to program the new BIOS information into the flash ROM. The boot block will be updated automatically only when necessary. This will minimize the chance that a failed update will prevent your system from booting up. When the programming is finished, Flashed Successfully will be displayed. 4. BIOS SETUP Updating BIOS NOTE: When you see the message "Boot Block is different", you may still press to update the BIOS. Yet if the update fails, your system will run a greater risk of boot failure depending on whether the boot block is damaged or not. ASUS CUR-DLS User's Manual 37
ASUS CUR-DLS User’s Manual
37
4. BIOS SETUP
4. BIOS SETUP
6.
When prompted to confirm the BIOS update, press
Y
to start the update.
7.
The utility starts to program the new BIOS information into the flash
ROM. The boot block will be updated automatically only when neces-
sary. This will minimize the chance that a failed update will prevent
your system from booting up. When the programming is finished,
Flashed
Successfully
will be displayed.
Updating BIOS
NOTE:
When you see the message “Boot Block is different”, you may
still press <Y> to update the BIOS. Yet if the update fails, your system
will run a greater risk of boot failure depending on whether the boot
block is damaged or not.