Brother International DCP-8060 Users Manual - English - Page 21

When the power switch is off or the machine is in Sleep mode, the LED is off., Customer Service. See - replace fuser message

Page 21 highlights

General information Service error Red Cover open Toner Life End Red Paper error Scan lock Others Out of memory Follow the steps below. 1. Turn off the power switch. 1 2. Wait a few seconds, and then turn it back on and try to print again. If you cannot clear the error and you see the same service call indication after turning the machine back on, please call Brother Customer Service. (See Brother numbers on page i.) The front cover or fuser cover is open. Close the cover. Replace the toner cartridge with a new one. Put paper in the tray or clear the paper jam. Check the LCD message. Check that the scanner lock lever is released. Check the LCD message. Memory is full. Note When the power switch is off or the machine is in Sleep mode, the LED is off. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116

General information
9
1
Note
When the power switch is off or the machine is in Sleep mode, the LED is off.
Red
Service error
Follow the steps below.
1. Turn off the power switch.
2. Wait a few seconds, and then turn it back on and try to print
again.
If you cannot clear the error and you see the same service call
indication after turning the machine back on, please call Brother
Customer Service. (See
Brother numbers
on page i.)
Red
Cover open
The front cover or fuser cover is open. Close the cover.
Toner Life End
Replace the toner cartridge with a new one.
Paper error
Put paper in the tray or clear the paper jam. Check the LCD
message.
Scan lock
Check that the scanner lock lever is released.
Others
Check the LCD message.
Out of memory
Memory is full.