Brother International DCP-8060 Users Manual - English - Page 46
Tray Select, Out of Memory message
UPC - 012502615064
View all Brother International DCP-8060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Chapter 5 Tray Select 5 You can change the tray use only for the next copy. a Load your document. b Use the dial pad to enter the number of copies (up to 99). c Press Tray Select. Contrast:-nnonn+ Quality :Auto Enlg/Red:100% Tray :MP>T1 c Select d c & OK d Press d or c to select the tray usage. Press OK. e Press Start. Press Tray Select MP>T1 or M>T1>T2 T1>MP or T1>T2>M #1(XXX)* #2(XXX)* MP(XXX)* * XXX is the paper size you set in Menu, 1, 2. Note • T2 and Tray #2 appear only if the optional paper tray is installed. • To change the Tray select setting, see Tray use in Copy mode on page 18. Out of Memory message 5 If the memory becomes full while you are making copies, the LCD message will guide you through the next step. If you get an Out of Memory message while scanning a subsequent page, you will have the option to press Start to copy the pages scanned so far, or to press Stop/Exit to cancel the operation. If you run out of memory, you can add it. See Memory Board on page 49. 34