Brother International HL-2170W Users Manual - English - Page 101
Black Spots at 75 mm, Clean the drum unit as follows
UPC - 012502619468
View all Brother International HL-2170W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Troubleshooting Examples of poor print quality 75 mm (2.95 in.) 75 mm (2.95 in.) Recommendation If the problem is not solved after printing a few pages, the drum unit may have glue from a label stuck on the OPC drum surface. Clean the drum unit as follows: 6 a Put the print sample in front of the drum unit, and find the exact position of the poor print. White Spots on black text and graphics at 75 mm (2.95 in.) intervals 6 75 mm (2.95 in.) 75 mm (2.95 in.) b Turn the drum unit gear by hand while looking at the surface of the OPC drum (1). 1 Black Spots at 75 mm (2.95 in.) intervals c When you have found the mark on the drum that matches the print sample, wipe the surface of the OPC drum with a dry cotton swab until the dust or glue on the surface comes off. CAUTION DO NOT clean the surface of the photosensitive drum with a sharp object. The drum unit may be damaged. Put in a new drum unit. See Replacing the drum unit on page 69. 93