Brother International HL-2170W Users Manual - English - Page 67
Network default settings (HL-2150N / HL-2170W only), Using the Go button - default password
UPC - 012502619468
View all Brother International HL-2170W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Control Panel Network default settings (HL-2150N / HL-2170W only) 4 If you want to reset the print server back to its default settings (resetting all information such as the password and IP address information), follow these steps: Using the Go button 4 a Turn off the printer. b Make sure that the front cover is closed and the power cord is plugged in. 4 c Hold down the Go button as you turn on the power switch. Keep the Go button pressed down until the Toner, Drum and Error LEDs light up. Release the Go button. Make sure that the Toner, Drum and Paper LEDs are off. d Press the Go button seven times. Make sure that all the LEDs light up to indicate the print server has been reset to its default settings. 59
Control Panel
59
4
Network default settings (HL-2150N / HL-2170W only)
4
If you want to reset the print server back to its default settings (resetting all information such as the password
and IP address information), follow these steps:
Using the Go button
4
a
Turn off the printer.
b
Make sure that the front cover is closed and the power cord is plugged in.
c
Hold down the
Go
button as you turn on the power switch. Keep the
Go
button pressed down until the
Toner
,
Drum
and
Error
LEDs light up. Release the
Go
button. Make sure that the
Toner
,
Drum
and
Paper
LEDs are off.
d
Press the
Go
button seven times. Make sure that all the LEDs light up to indicate the print server has
been reset to its default settings.