Brother International KE-436C Instruction Manual - English - Page 43

Lubrication

Get Brother International KE-436C PDF manuals and user guides View all Brother International KE-436C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

8. MAINTENANCE AND INSPECTION 8-3. Lubrication Note 1: Fill the machine with oil when the oil level is down to about one-third full in the oil sight glass. If oil is not added and the oil drops below this level, there is the danger that the machine may seize during operation. Note 2: Be sure to let the machine operate for a while after adding the oil. Note 3: If there is no more oil on the felt of the shuttle race base, problems with sewing may result, so add oil to the felt until it is slightly soaked. Note 4: Use only specified Brother oil (Nisseki Mitsubishi Sewing Lube 10N;VG10) for the machine oil. 2685Q 1. Fill the arm-side oil tank with oil. 2. Fill the bed-side oil tank with oil. 2686Q 3. Add oil to the felt (1) of the shuttle race base. * When setting up the sewing machine and when it hasn't been used for an extended period of time, be sure to add 2-3 drops oil to the felt. 2512Q 4. If using the liquid cooling tank (2), fill it with silicon oil (100 mm2/s). 2513Q 37 KE-436C

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
8. MAINTENANCE AND INSPECTION
37
KE-436C
8-3. Lubrication
Note 1:
Fill the machine with oil when the oil level is down to about one-third full in the oil sight glass.
If oil is not added and the oil drops below this level, there is the danger that the machine may seize during operation.
Note 2:
Be sure to let the machine operate for a while after adding the oil.
Note 3:
If there is no more oil on the felt of the shuttle race base, problems with sewing may result, so add oil to the felt until it
is slightly soaked.
Note 4:
Use only specified Brother oil (Nisseki Mitsubishi Sewing Lube 10N;VG10) for the machine oil.
1.
Fill the arm-side oil tank with oil.
2.
Fill the bed-side oil tank with oil.
3.
Add oil to the felt (1) of the shuttle race base.
* When setting up the sewing machine and when it
hasn’t been used for an extended period of time, be
sure to add 2-3 drops oil to the felt.
4.
If using the liquid cooling tank (2), fill it with silicon oil (100
mm
2
/s).
2685Q
2686Q
2513Q
2512Q