Brother International KE-436C Instruction Manual - English - Page 58
CHANGING SPECIAL FUNCTIONS USING THE MEMORY SWITCHES, If pressed once more
View all Brother International KE-436C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
11. CHANGING SPECIAL FUNCTIONS USING THE MEMORY SWITCHES 11. CHANGING SPECIAL FUNCTIONS USING THE MEMORY SWITCHES The functions of the switches on the operation panel can be changed to carry out special functions. Note: After changing the memory switch settings, press the power switch to turn the power off and then back on again. 2733Q 1. Turn on the power switch. 2. While pressing the TEST switch (1), press the STEP BACK switch (2) to switch to setting mode. 3. Press the program select switch (4) so that the number displayed on the display screen (3) matches the switch number (00 - 3F) for the function that you would like to select from the table. 4. Press the STEP BACK switch (2) to switch the setting appearing in the display screen (5) from OFF to ON. If pressed once more: 1286S 1287S If the B.T. CHANGE switch (6) is pressed at this time, all memory switch settings will be changed to OFF. 5. Press the TEST switch (1). The display will return to normal. Note: The following steps set the memory switch settings separately for each program number. 6. Once the program data has been read from the floppy disk, change to memory switch setting mode and then press the B.T. SET switch (7). The buzzer will sound twice, and the current memory switch settings will be written to the floppy disk. KE-436C 52