Brother International KE-436C Instruction Manual - English - Page 44

Draining the oil, 8-5. Cleaning the control box air inlet port

Get Brother International KE-436C PDF manuals and user guides View all Brother International KE-436C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

8-4. Draining the oil 8. MAINTENANCE AND INSPECTION 1. Remove and empty the waste oil container (1) whenever it is full. 2. After emptying the waste oil container (1), screw it back into its original position. 2550Q 8-5. Cleaning the control box air inlet port Use a vacuum cleaner to clean the filter in the air inlet port (2) of the control box (1) at least once a month. * If the machine is used while the air inlet port is blocked, the inside of the control box will overheat. When this happens, the overheating error code "E-d0" will be displayed and you will not be able to operate the sewing machine. 2551Q 8-6. Cleaning the air holes of belt cover and frame side cover Remove the belt cover (1) and the frame side cover (2), and then clean the air holes (3). After cleaning, install the belt cover (1) and the frame side cover (2). * If dust collects in the air holes, it may cause the motor to overheat. The air holes should be cleaned at regular intervals. In addition, be careful not to let any foreign matter get into the air holes. 8-7. Cleaning the eye guard 2463Q Wipe the eye guard clean with a soft cloth. Note: Do not use solvents such as kerosene or thinner to clean the eye guard. 1235S KE-436C 38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
8. MAINTENANCE AND INSPECTION
38
KE-436C
8-4. Draining the oil
1.
Remove and empty the waste oil container (1) whenever
it is full.
2. After emptying the waste oil container (1), screw it back
into its original position.
8-5. Cleaning the control box air inlet port
Use a vacuum cleaner to clean the filter in the air inlet port
(2) of the control box (1) at least once a month.
*
If the machine is used while the air inlet port is blocked,
the inside of the control box will overheat.
When this happens, the overheating error code “E-d0” will
be displayed and you will not be able to operate the
sewing machine.
8-6. Cleaning the air holes of belt cover and frame side cover
Remove the belt cover (1) and the frame side cover (2), and
then clean the air holes (3).
After cleaning, install the belt cover (1) and the frame side
cover (2).
*
If dust collects in the air holes, it may cause the motor to
overheat. The air holes should be cleaned at regular
intervals.
In addition, be careful not to let any foreign matter get into
the air holes.
8-7. Cleaning the eye guard
Wipe the eye guard clean with a soft cloth.
Note:
Do not use solvents such as kerosene or thinner to clean
the eye guard.
2550Q
2551Q
2463Q
1235S