Brother International KE-436C Instruction Manual - English - Page 63

12. SETTING THE WORK CLAMP MODE 12-1. Light work clamp For pneumatic specifications, the hose connections can be changed so that the pressers are made to lower gently when the presser pedal is depressed to the 1st step, and firmly when the presser pedal is depressed to the 2nd step. This makes it easier to carry out position matching when attaching small articles such as labels. [Memory switch setting] Set memo-3b to 5 for two-pedal mode so that the pressers lower in the order of left then right for the standard hose connection. (Refer to "11. Changing special functions using the memory switches".) < Hose connections for light work clamp operation by both pressers > Branch Plug 1088Q [How to use] 1. Depress the presser pedal to the 1st step to lower the pressers and apply a light pressure. You can then position small articles such as labels at this time. 2. After checking that everything is positioned correctly, depress the presser pedal to the 2nd step to firmly clamp the article being sewn. 3. Press the start pedal to start sewing. The hoses can be connected in combinations other than the one shown above so that only one side of the presser operates in light work clamp mode. Branch and plug connectors Cylinder connectors A B C D Operation when presser pedal is depressed to the 1st step Branch: 1B, 2A Plug: 1A, 2B Both pressers operate in light work clamp mode 1B 2A 1B 2A (example shown above) Branch: 1B Plug: 2B Branch: 1B Plug: 2B Branch: 2A Plug: 1A Branch: 2A Plug: 1A 1B 2A 1B 1A Only left presser lowers, and it lowers in light work clamp mode Only right presser lowers , and it lowers in light work clamp 1B 1A 1B 2A mode Both pressers lower, but only left presser lowers in light work 1B 2A 2B 2A clamp mode Both pressers lower, but only right presser lowers in light work 2B 2A 1B 2A clamp mode 57 KE-436C