Brother International KE-436C Instruction Manual - English - Page 49

STANDARD ADJUSTMENTS, 7-1. Replacing the movable knife and fixed knife

Get Brother International KE-436C PDF manuals and user guides View all Brother International KE-436C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

9. STANDARD ADJUSTMENTS 9-7-1. Replacing the movable knife and fixed knife 2615Q 1. Open the large shuttle hook cover, remove the bolts (1) and the feed plate (2). 2. Remove the two screws (3) and the two screws (4), and then remove the needle plate (5). 3. Remove the thread trimmer connecting rod (6) from the connecting rod lever pin (7). 2485Q 2946Q 2947Q 4. Remove the movable knife (8) and replace it with a new one. At this time, check that the movable knife (8) and the fixed knife (9) cut the thread cleanly. If necessary, adjust by using the appropriate movable knife washer (10) (supplied as accessories). * Apply grease to the outside of the collar (11) at this time. 5. Install the fixed knife (9) at a distance of 0.5 mm from the needle hole plate (12). 6. Place the thread trimming connecting rod (6) onto the connecting rod lever pin (7), and then install to the needle plate (5). 43 KE-436C

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
9. STANDARD ADJUSTMENTS
43
KE-436C
9-7-1. Replacing the movable knife and fixed knife
1.
Open the large shuttle hook cover, remove the bolts (1) and the feed plate (2).
2.
Remove the two screws (3) and the two screws (4), and then remove the needle plate (5).
3.
Remove the thread trimmer connecting rod (6) from the connecting rod lever pin (7).
4.
Remove the movable knife (8) and replace it with a new one. At this time, check that the movable knife (8) and the fixed
knife (9) cut the thread cleanly. If necessary, adjust by using the appropriate movable knife washer (10) (supplied as
accessories).
*
Apply grease to the outside of the collar (11) at this time.
5.
Install the fixed knife (9) at a distance of 0.5 mm from the needle hole plate (12).
6.
Place the thread trimming connecting rod (6) onto the connecting rod lever pin (7), and then install to the needle plate (5).
2615Q
2485Q
2946Q
2947Q