Brother International MFC 5440CN Software Users Manual - English - Page 113
For Network cable users
UPC - 012502610915
View all Brother International MFC 5440CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
For Network cable users 1 Insert a SmartMedia®, CompactFlash®, Memory Stick®, SecureDigital™ or xD-Picture Card™ into your machine. If more than two media cards are inserted at the same time, the PhotoCapture Center™ will read only the card that was put in first. To have access to another card, you must first take out all the cards, and then put in the media card you wish to access. 2 Double-click the Network PhotoCapture Centre icon. 3 Your browser software will appear and a list of file names on your media card will be shown. Your browser software accesses the media card using FTP and the network Host Name of the machine. You can open the software by entering ftp://XXX.XXX.XXX.XXX (Where XXX.XXX.XXX.XXX is the IP address of your Brother machine). 4 Click the file name you wish to see. When you take out a media card, do the following to prevent damage to the media card: 5 Close the browser. 6 Wait until the PhotoCapture button stops blinking before taking out the media card. Do NOT unplug the power cord, or remove a SmartMedia®, CompactFlash®, Memory Stick®, SecureDigital™ or xD-Picture Card™ from the machine while it is reading the card (PhotoCapture button flashing). You could lose your data or damage the card. If you took out the media card while PhotoCapture button was flashing, you must immediately restart your PC before putting the media card back in. If you put in another media card before the PC is restarted, the data on it may be destroyed. USING THE PHOTOCAPTURE CENTER™ FROM YOUR PC 6 - 3