Brother International NX-600 Users Manual - English - Page 104
Satin stitching, Connect the foot controller.
View all Brother International NX-600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
GETTING READY SEWING BASICS UTILITY STITCHES UTILITY STITCHES CONTENTS After sewing is finished, slide the drop feed g lever to (to the left as seen from the front of the machine) to raise the feed dogs. 1 a Back side • Normally, the drop feed lever is positioned at the left. Satin stitching A decorative stitch can be sewn by changing the stitch width of a satin stitch. If the sewing machine is set so that the stitch width can be adjusted using the sewing speed controller, the stitch width can quickly and easily be adjusted. In this case, the sewing speed is adjusted with the foot controller. Connect the foot controller. a • For details, refer to "Starting to sew" (page 48). Attach zigzag foot "J". b J • For details, refer to "Replacing the presser foot" (page 37). Turn on the sewing machine, and then press c (Settings key) in the operation panel. X The settings screen appears. Press , , and (Arrow keys) until d is selected. Press (OK key). e X The screen for specifying that the stitch width can be controlled with the sewing speed controller appears. APPENDIX INDEX Press to select . f To return to , press . X The machine is now set so that the stitch width can be controlled with the sewing speed controller. 98