Brother International NX-600 Users Manual - English - Page 91
Inserting a side zipper, mm 1/8 inch.
View all Brother International NX-600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Inserting a side zipper Press open the seam allowance from the c wrong side of the fabric. Stitching is sewn on only one piece of fabric. Use this type of zipper for side openings and back openings. 1 CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES 1 2 3 a Stitching b Right side of fabric c End of zipper opening The following procedure will describe how to stitch on the left side, as shown in the illustration. Attach zigzag foot "J" and sew straight stitches a up to the zipper opening. With the right sides of the fabric facing each other, sew reverse stitches after reaching the zipper opening. • For details, refer to "Basic stitching" (page 73). Using a basting stitch, continue sewing to the b edge of the fabric. 1 a Wrong side of fabric Press the seam allowance so that the right side d (the side that will not be stitched) has an extra 3 mm (1/8 inch). 1 2 a Wrong side of fabric b 3 mm (1/8 inch) Align the zipper teeth with the pressed edge of e the fabric having the extra 3 mm (1/8 inch), and then baste or pin the zipper in place. 2 1 2 3 4 a Basting stitching b Reverse stitches c Wrong side of fabric d End of zipper opening a Zipper teeth b Basting stitching Attach the presser foot holder to the right pin f of zipper foot "I". If the stitching will be sewn on the right side, attach the presser foot holder to the left pin of the zipper foot. 1 I 2 a Pin on the right side b Needle drop point Zipper Insertion 85 APPENDIX INDEX