Brother International NX-600 Users Manual - English - Page 37
Using thread that winds off quickly, Pulling up the bobbin thread
View all Brother International NX-600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES Using thread that winds off quickly When using thread that winds off quickly, such as transparent nylon thread or metallic thread, place the enclosed spool net over the spool before placing the spool of thread onto the spool pin. If the spool net is too long, fold it to fit the size of the spool. 1 2 Pulling up the bobbin thread When making gathers or before free-motion quilting, first pull up the bobbin thread as described below. Insert the bobbin into the shuttle. a • Refer to steps a through e of "Installing the bobbin" (page 22). Pass the bobbin thread through the slot. b Do not cut the thread with the cutter. 3 4 a Spool net b Spool c Spool cap d Spool pin While lightly holding the upper thread with c your left hand, press (Needle position button) twice to raise the needle. 1 a Needle position button X The bobbin thread is looped around the upper thread and can be pulled up. Carefully pull the upper thread upward to pull d out the end of the bobbin thread. APPENDIX INDEX Upper Threading 31