Brother International NX-600 Users Manual - English - Page 65
then press, After reaching the end of the stitching, press
View all Brother International NX-600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES Press to select . f To return to , press . X The machine is now set for programmed thread-cutting. Press (OK key). g X The initial stitch screen appears again, and appears in the lower-left corner of the screen. After reaching the end of the stitching, press i (Reverse/reinforcement stitch button) once. This step is not necessary if a stitch such as those for sewing buttonholes and bar tacks is selected where reinforcement stitches are automatically sewn. 1 • When the sewing machine is turned off, the programmed thread-cutting setting is cancelled. Position the fabric under the presser foot, and h then press (Start/stop button) once. a Reverse/reinforcement stitch button X After reverse/reinforcement stitches are sewn, the sewing machine stops and cuts the thread 1 a Start/stop button X After reverse/reinforcement stitches are sewn, the machine starts sewing. The thread is cut here. Memo z Reverse/reinforcement stitches will not be sewn and the thread will not automatically be cut if the start/stop button is pressed at the end of the stitching. Be sure to press the reverse/reinforcement stitch button at the end of the stitching. APPENDIX INDEX Useful Functions 59