Brother International NX-600 Users Manual - English - Page 130
Realigning the pattern
View all Brother International NX-600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
GETTING READY SEWING BASICS UTILITY STITCHES UTILITY STITCHES Realigning the pattern If the pattern appears as shown below, the stitching is misaligned in the vertical direction. CONTENTS The pattern may not be sewn correctly, depending on the type of fabric being sewn or the sewing speed. If this occurs, adjust the pattern while sewing on a piece of scrap fabric that is the same as that used for your project. Attach monogramming foot "N". a If the pattern appears as shown below, the stitching is misaligned in the horizontal direction. • For details, refer to "Replacing the presser foot" (page 37). Press (Stitch selection key) in the operation b panel. X The screen containing the various types of stitches appears. Press , , and (Arrow keys) until c is selected, and then select . X The pattern alignment stitch is selected. Start sewing. d If the pattern is not sewn correctly, follow the steps below to adjust the sewing. Press (Settings key) in the operation panel. f X The settings screen appears. Press , , and (Arrow keys) until g or is selected. To adjust the vertical position, select . To adjust the horizontal position, select . APPENDIX X The pattern for making the adjustment is sewn. X The sewing machine stops after it has finished sewing the pattern. Check the sewn pattern. e If the part of the pattern indicated in the illustration is sewn uniformly, the pattern is correctly aligned. Press (OK key). h X The screen for adjusting the pattern appears. ■ Vertical pattern adjustment ■ Horizontal pattern adjustment INDEX 124